Effective and resource-saving: Effective and resource-saving: these systems use high-pressure atomisation to increase the extinguishing effect of the water. And consume up to 80 % less extinguishing water than sprinkler systems, for example. This effectively combats fires and at the same time reduces damage caused by extinguishing water.
Olaf Jürgens
Area Manager New Technologies
T: +49 89 99119-460
Firian HPWM systems spray the extinguishing water under high pressure. This creates a fine spray mist that increases the volume of water by a factor of 1,700. When the extinguishing mist hits the source of the fire, the water vaporises - it cools the fire and displaces the oxygen. At the same time, the fine water droplets wash soot and smoke gases out of the air and knock them down.
Protect property and the environment even more efficiently
through maximum extinguishing effect with minimum water consumption
Increased heat retention and cooling effects
due to the large droplet surface of the extinguishing water
Up to 80 % less water consumption
compared to sprinkler systems
Significantly less extinguishing damage
due to reduced water consumption
Significantly larger protected area per system
compared to sprinklers
Less space required for the water depots,
as far less extinguishing water is required. This also enables and simplifies retrofitting in existing buildings.
Customised fire protection concepts,
z. e.g. for historical buildings and other specific requirements
HPWM systems with nitrogen cylinders:
Diesel generators
turbines
Manual paint booths
Combined heat and power plants
Generator and transformer rooms
Both pump systems:
Protection against OH1 to OH4 risks
Larger hotels and underground car parks
Hospitals
Laboratories
Museums
Listed buildings
Wax sealing and painting systems
paint warehouses
High-rise buildings
Reference:
FAIR, Darmstadt
Firian fulfils the highest international standards. And has multiple certifications:
